Customization: | Available |
---|---|
After-sales Service: | Warranty: 12 Months. |
Warranty: | 12 Months. |
Still deciding? Get samples of US$ 23/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Peak Current | 800A |
Output | 5V-2.1A*2; 12V Jump Start |
OEM/ODM | Yes |
Starting current | 400A |
Operating temperature: | - 20 ~ 60 ºC |
Material: | ABS, plastic |
Weight: | 315g |
Color | Black |
Defensive Function | |
Over current protection | Over voltage protection |
Short circuit protection | Over discharge protection |
Over charge protection | Over power protection |
Temperature protection | Recovery protection |
Electromagnetic field protection |
Use tips! (All charging treasures can refer to)
The product has just been received. First turn on the flashlight to discharge, then charge the product for more than 4 hours, and then start the car, because the product contains virtual electricity This operation can prolong the service life of the product!
Tips for daily maintenance:1: The battery has a shelf life. Whether you use it or not, it is recommended to charge and discharge the battery once every 2-3 months.
2 When it is not used for a long time! Please keep 3 grids of power supply or more than 50% of power!
(Tips: Remember to charge the battery once every 2-3 months when you are not using it. If the power supply is low or the storage of virtual power has an impact on the battery, proper maintenance will last longer~~
Before use, there is a small prompt[1] that the car cannot be started by continuous ignition/or the key cannot be turned, and the positive and negative poles of
[2] can not be reversed after every 30 seconds of starting. The two clips cannot be short circuited.
[3] Remove the clip within 30 seconds after successfully starting the car.
Violation of the above three operations may cause the [fuse box] of the clip to burn out. Please pay attention to the operation method.